| DTC Code | DTC Name |
|---|---|
| B2424 | Headlight Leveling Motor LH Communication Malfunction |
| B2425 | Headlight Leveling Motor RH Communication Malfunction |
DESCRIPTION
The headlight swivel ECU assembly receives a signal from each headlight leveling motor using LIN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2424 | Headlight Leveling Motor LH Communication Malfunction |
|
|
| B2425 | Headlight Leveling Motor RH Communication Malfunction |
|
|
WIRING DIAGRAM
CAUTION / NOTICE / HINT
Note
If the headlight swivel ECU assembly has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight swivel ECU assembly.
PROCEDURE
CHECK FOR DTC
Clear the DTCs.
Check for DTCs.
| OK |
|---|
| DTC B2424 and B2425 are not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
CHECK HARNESS AND CONNECTOR (HEADLIGHT SWIVEL ECU ASSEMBLY - HEADLIGHT ASSEMBLY)
Disconnect the A93 headlight swivel ECU assembly connector.
Disconnect the A148 headlight assembly LH connector or A147 headlight assembly RH connector.
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | |||||||||
|---|---|---|---|---|---|---|---|---|---|
|
|||||||||
|
| Result | |||
|---|---|---|---|
|
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
| OK |
|
REPLACE HEADLIGHT UNIT (HEADLIGHT LEVELING MOTOR)
Replace the headlight unit (headlight leveling motor) with a new or known good one.
Check for DTCs.
| OK |
|---|
| DTC B2424 and B2425 are not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END (HEADLIGHT UNIT (HEADLIGHT LEVELING MOTOR) WAS DEFECTIVE) |
| NG |
|
REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY Click here |