AUTOMATIC HIGH BEAM SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE AUTOMATIC HIGH BEAM SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.


        Light Control
        Tester Display Description Default Setting ECU
        Automatic High Beam Enabling (ON) or disabling (OFF) of the automatic high beam function ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)