WASHER NOZZLE(for Front Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A013BAUC01
      *a Vehicle center line - -
      A01399X Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 405 mm (1.33 ft.) B 165 mm (6.50 in.)
      C 100 mm (394 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.