WASHER NOZZLE(for Front Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A00Y7RYC01
      *a Vehicle center line - -
      A00Y4VF Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 410 mm (1.34 ft.) B 160 mm (6.30 in.)
      C 105 mm (4.13 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.