WASHER NOZZLE(for Hatchback Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER NOZZLE


    1. Operate the rear washer nozzle and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A00Y62UC01
      *a Vehicle center line *b End of back door glass
      A00Y4VF Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 48.3 mm (1.90 in.) B 11.9 mm (0.469 in.)
      C 48.3 mm (1.90 in.) D 9.6 mm (0.378 in.)
      E 3.2 mm (0.126 in.) F 5.6 mm (0.220 in.)
      G 75.8 mm (2.98 in.) H 99 mm (3.90 in.)

      Tech Tips

      If the result is not as specified, replace the rear washer nozzle.