PROCEDURE
INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for Front Side)
Engage the 9 clamps to install the fuel lid lock control cable sub-assembly.
Return the floor carpet to the original position.
INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for Rear Side)
Insert the fuel lid lock control cable sub-assembly as shown in the illustration.
Engage the 2 claws to install the fuel lid lock control cable sub-assembly.
Engage the clamp.
Connect the fuel lid lock control cable sub-assembly.
INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
Connect the fuel lid lock control cable sub-assembly to the fuel lid lock open lever sub-assembly.
Engage the guide as shown in the illustration.
Install the fuel lid lock open lever sub-assembly with the screw.
INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX (w/ Woofer)
INSTALL TONNEAU COVER HOLDER BRACKET LH (w/ Woofer)
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
INSTALL RECLINING REMOTE CONTROL BEZEL LH
INSTALL NO. 2 DECK SIDE TRIM HOOK
INSTALL REAR SEAT SIDE GARNISH LH
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH
INSTALL CENTER PILLAR LOWER GARNISH LH
CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL REAR UNDER SIDE COVER LH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL FRONT DOOR SCUFF PLATE LH
INSTALL REAR SEATBACK ASSEMBLY LH
CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT CUSHION ASSEMBLY
INSTALL REAR DECK TRIM COVER
INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)
INSTALL TONNEAU COVER ASSEMBLY
INSTALL DECK FLOOR BOX LH (w/o Woofer)
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)
INSTALL REAR FLOOR MAT ASSEMBLY
INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)
INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)
INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)
INSTALL FRONT SEAT ASSEMBLY LH