BACK DOOR(for Wagon) REASSEMBLY

PROCEDURE


  1. INSTALL BACK DOOR STAY BOLT

    Click here

  2. INSTALL BACK DOOR STAY ASSEMBLY LH

    Click here

  3. INSTALL BACK DOOR STAY ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. INSTALL DOOR DUST PROOF SEAL


    1. A01KU34

      Engage the guide and 2 claws to install the door dust proof seal.

      Tech Tips

      Use the same procedure for the other 2 door dust proof seals.

  5. INSTALL BACK DOOR DAMPER ASSEMBLY


    1. A01KSHM

      Engage the guide.

    2. Install the back door damper assembly with the 3 bolts.

  6. INSTALL BACK DOOR PANEL CUSHION


    1. A01KT1K

      Engage the 2 claws to install 2 new back door panel cushions.

  7. INSTALL REAR WIPER MOTOR GROMMET

    Click here

  8. INSTALL REAR WIPER MOTOR ASSEMBLY

    Click here

  9. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY

    Click here

  10. INSTALL REAR WIPER ARM HEAD CAP

    Click here

  11. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

    Click here

  12. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  13. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  14. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  15. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  16. INSTALL BACK DOOR LOCK ASSEMBLY

    Click here

  17. INSTALL BACK DOOR PANEL NO. 2 PROTECTOR


    1. Clean the back door panel sub-assembly.

    2. Remove the release paper from a new back door panel No. 2 protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. A01KT93C01
      *a Double-sided Tape

      Engage the 2 clips and install the back door panel No. 2 protector.

  18. INSTALL BACK DOOR PANEL NO. 1 PROTECTOR

    Tech Tips

    Use the same procedure as for the back door panel No. 2 protector.

  19. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    1. A01KTEC

      Engage the 12 clips to install the back door trim panel assembly.

  20. INSTALL DOOR PULL HANDLE


    1. A01KT8C

      Engage the 4 claws to install the door pull handle.

      Tech Tips


      • With the back door fully open, install the door pull handle so that the arrow on the backside of door pull handle points up.

      • Use the same procedure for the RH side and LH side.

  21. INSTALL BACK DOOR SIDE GARNISH LH


    1. A01KR0R

      Engage the 2 clips and 2 claws to install the back door side garnish LH.

  22. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  23. INSTALL REAR WASHER NOZZLE

    Click here

  24. INSPECT REAR WASHER NOZZLE

    Click here

  25. ADJUST REAR WASHER NOZZLE

    Click here

  26. INSTALL CENTER STOP BRACKET


    1. A01KU3Z

      Engage the 2 clips to install the 2 center stop brackets.

    2. A01KT1Q

      Engage the 2 center stop light clips as shown in the illustration.

  27. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click here

  28. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY


    1. A01KSOY

      Engage the 4 clips and 4 claws to install the back door upper trim panel assembly.