HOOD REASSEMBLY

PROCEDURE


  1. INSTALL HOOD MOULDING CLIP


    1. A0139TS

      Engage the 2 claws and install the hood moulding clip.

  2. CONNECT WASHER HOSE ASSEMBLY


    1. A013B44

      Engage the 6 clamps to connect the washer hose assembly.

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY

    Click here

  4. INSPECT WASHER NOZZLE SUB-ASSEMBLY

    Click here

  5. ADJUST WASHER NOZZLE SUB-ASSEMBLY

    Click here

  6. INSTALL HOOD INSULATOR (w/ Hood Insulator)


    1. A013B2Y

      Engage the guide.

    2. Install the hood insulator with 6 new hood insulator clips.

  7. INSTALL HOOD LOCK ASSEMBLY


    1. A013A1V

      Apply MP grease to the sliding areas of the lock.

    2. w/o Engine Hood Courtesy Switch:


      1. A013B4Q

        Install the hood lock assembly with the 3 bolts.

        Torque:
        7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    3. w/ Engine Hood Courtesy Switch:


      1. A0139Z2

        Install the hood lock assembly with the 3 bolts.

        Torque:
        7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      2. Connect the connector.

    4. for LHD:


      1. A0139AU

        Connect the hood lock control cable assembly.

    5. for RHD:


      1. A013AGQ

        Connect the hood lock control cable assembly.

  8. ADJUST HOOD SUB-ASSEMBLY

    Click here