HOOD DISASSEMBLY

PROCEDURE


  1. REMOVE HOOD LOCK ASSEMBLY


    1. for LHD:


      1. A00YO50

        Disconnect the hood lock control cable assembly.

    2. for RHD:


      1. A00YN9P

        Disconnect the hood lock control cable assembly.

    3. w/o Engine Hood Courtesy Switch:


      1. A00YPXU

        Remove the 3 bolts and hood lock assembly.

    4. w/ Engine Hood Courtesy Switch:


      1. A00YNNV

        Remove the 3 bolts.

      2. Disconnect the connector and remove the hood lock assembly.

  2. REMOVE HOOD INSULATOR (w/ Hood Insulator)


    1. A00YPQP

      Remove the 6 hood insulator clips.

    2. Disengage the guide and remove the hood insulator.

  3. REMOVE WASHER NOZZLE SUB-ASSEMBLY

    Click here

  4. DISCONNECT WASHER HOSE ASSEMBLY


    1. A00YN57

      Disengage the 6 clamps and disconnect the washer hose assembly.

  5. REMOVE HOOD MOULDING CLIP


    1. A00YO3K

      Disengage the 2 claws and remove the hood moulding clip as shown in the illustration.