HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas "a" through "d" are within each standard range.

      A01KRNRC03
      Standard Clearance
      Area Measurement Area Measurement
      a 3.0 to 7.0 mm (0.118 to 0.276 in.) b 3.0 to 7.0 mm (0.118 to 0.276 in.)
      c 2.0 to 5.0 mm (0.0787 to 0.197 in.) d -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)