HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas "a" through "e" are within each standard range.

      A00YNCHN01
      Standard Clearance
      Area Measurement Area Measurement
      a 2.85 to 6.85 mm (0.112 to 0.270 in.) b -1.2 to 2.8 mm (-0.0472 to 0.110 in.)
      c 4.85 to 8.85 mm (0.191 to 0.348 in.) d 2.0 to 5.0 mm (0.0787 to 0.197 in.)
      e -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) - -