POWER WINDOW REGULATOR MOTOR(for Rear Door) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR WINDOW REGULATOR ASSEMBLY

    Click here

  2. INSTALL REAR DOOR GLASS RUN

    Click here

  3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  4. INSTALL REAR DOOR REAR WINDOW GUIDE WITH REAR DOOR REAR GUIDE SEAL

    Click here

  5. CONNECT REAR DOOR GLASS RUN

    Click here

  6. CONNECT REAR DOOR WEATHERSTRIP

    Click here

  7. INSTALL REAR DOOR SERVICE HOLE COVER


    1. Install a new rear door service hole cover.

      Click here

    2. Connect the connector.

  8. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  9. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    Click here

  10. INSTALL REAR ARMREST ASSEMBLY

    Click here

  11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  12. INSTALL BATTERY BOX COVER

    for Hatchback: Click here

    for Wagon: Click here

  13. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  14. INSPECT POWER WINDOW OPERATION

    Click here