REAR BUMPER(for Hatchback) REMOVAL

PROCEDURE


  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    Click here

  4. REMOVE REAR BUMPER ASSEMBLY


    1. A01KRZ4C01
      A01KSBW Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. A01KT0Q

      Remove the 2 screws.

    3. Using a clip remover, remove the 7 clips.

    4. A01KSJ4

      Using a clip remover, remove the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01KU3X

      Disengage the 4 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01KU49

      Disengage the 4 claws as shown in the illustration.

    7. A01KS4Q

      Disconnect the connector.

    8. Disengage the clamp and remove the rear bumper assembly.