REAR BUMPER(for Wagon) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 4 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  2. REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  3. REMOVE NO. 4 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  4. REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. Disconnect the 4 connectors.

      A012JA7C01
      A012F6O Adhesive Tape - -

    2. Remove the adhesive tape from the rear bumper cover.

    3. Disengage the 4 clamps to remove the No. 2 luggage room wire.

  5. REMOVE REAR BUMPER PAD LH


    1. A012K3J

      Remove the rear bumper pad LH.

  6. REMOVE REAR BUMPER PAD RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE CENTER REAR BUMPER PAD


    1. A012N9B

      Remove the 2 center rear bumper pads.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  8. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. A012L2E

      Remove the screw.

    2. Disengage the claw to remove the reflex reflector assembly LH.

  9. REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. REMOVE REAR BUMPER GUARD


    1. Remove the 5 clips.

      A012JNU

    2. Disengage the 8 claws and 5 guides to remove the rear bumper guard.

      A012LD1

    3. Remove the 3 clips.

      A012NAX

    4. Disengage the 6 claws and 3 guides to remove the No. 2 rear bumper moulding.

      A012JQZ

  11. REMOVE REAR BUMPER MOULDING


    1. Remove the 5 clips.

      A012LHI

    2. Disengage the 8 claws and 5 guides to remove the rear bumper moulding.

      A012FPP

  12. REMOVE REAR BUMPER SIDE RETAINER LH


    1. A012K2W

      Remove the 3 screws.

    2. A012FI9

      Disengage the 4 claws and guide to remove the rear bumper side retainer LH.

  13. REMOVE REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  15. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  16. REMOVE UPPER REAR BUMPER RETAINER LH


    1. A012JC7

      Remove the screw and upper rear bumper retainer LH.

  17. REMOVE UPPER REAR BUMPER RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  18. REMOVE REAR BUMPER SIDE SEAL LH


    1. A012ITC

      Remove the 3 clips and rear bumper side seal LH.

  19. REMOVE REAR BUMPER SIDE SEAL RH


    1. A012IW3

      Remove the 3 clips and rear bumper side seal RH.

  20. REMOVE NO. 1 REAR BUMPER REINFORCEMENT


    1. A012KO2

      Remove the 8 bolts and No. 1 rear bumper reinforcement.

  21. REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH


    1. A012IAZ

      Remove the 3 bolts and rear bumper arm sub-assembly LH.

  22. REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.