REAR BUMPER(for Wagon) REMOVAL

PROCEDURE


  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. A01KRL1C01
      A01KSBW Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. A01KTAH

      Remove the 2 screws.

    3. A01KREU

      Remove the 2 screws and 2 clips.

    4. A01KRHY

      Using a clip remover, remove the 7 clips.

    5. A01KSD7

      Using a clip remover, remove the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01KR0U

      Disengage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A01KSV3

      Disengage the 4 claws as shown in the illustration.

    8. w/ TOYOTA Parking Assist-sensor System:


      1. Disconnect the connector.

    9. Remove the rear bumper assembly.