FRONT BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE HEADLIGHT WASHER COVER LH (w/ Headlight Cleaner System)

    Click here

  2. REMOVE HEADLIGHT WASHER COVER RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  5. REMOVE NO. 2 HEADLIGHT CLEANER CLAMP (w/ Headlight Cleaner System)

    Click here

  6. REMOVE NO. 1 HEADLIGHT CLEANER CLAMP (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure for the RH side and LH side.

  7. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. A013B5N

      Disengage the 9 clamps and remove the headlight cleaner hose.

  8. REMOVE NO. 2 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  9. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  10. REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  11. REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    for Simple Intelligent Parking Assist System:

    Click here

  12. REMOVE ULTRASONIC SENSOR BEZEL (w/ TOYOTA Parking Assist-sensor System)

    Click here

  13. REMOVE ULTRASONIC SENSOR BEZEL (w/ TOYOTA Parking Assist-sensor System)

    for Simple Intelligent Parking Assist System:

    Click here

  14. REMOVE NO. 5 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. A01397Q

      Disengage the 9 clamps and remove the No. 5 engine room wire.

  15. REMOVE FRONT BUMPER PAD


    1. A0139DJ

      Remove the front bumper pad.

      Tech Tips

      Use the same procedure for the RH and LH sides.

  16. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A013AEW

      Remove the 2 clips and cool air intake duct seal.

  17. REMOVE FRONT FENDER LINER RETAINER


    1. A013A8V

      Disengage the claw and remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  18. REMOVE FRONT BUMPER HOLE COVER


    1. A013AEJC02
      *a Hook

      Disengage the 2 claws.

    2. Disengage the hook and remove the front bumper hole cover.

  19. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  20. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  21. REMOVE FOG LIGHT COVER LH (w/o Fog Light)


    1. A013AV1

      Disengage the 6 claws and guide, and remove the fog light cover LH.

  22. REMOVE FOG LIGHT COVER RH (w/o Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  23. REMOVE FOG LIGHT COVER LH (w/ Fog Light)


    1. A0139JG

      Remove the screw.

    2. Disengage the 6 claws and guide, and remove the fog light cover LH.

    3. A013AR6

      Disengage the 4 claws and remove the fog light mounting bracket LH.

  24. REMOVE FOG LIGHT COVER RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  25. REMOVE FRONT BUMPER EXTENSION


    1. A013ATN

      Remove the 3 screws.

    2. A013AB1

      Disengage the 12 claws and remove the front bumper extension.

  26. REMOVE LOWER NO. 1 RADIATOR GRILLE


    1. A013ACA

      Remove the 4 screws.

    2. A013ALU

      Disengage the 17 claws and remove the lower No. 1 radiator grille.

  27. REMOVE FRONT BUMPER MOULDING


    1. A0139CN

      Remove the 2 screws.

    2. A013B4D

      Disengage the 10 claws and remove the front bumper moulding.

  28. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. A013AE3C04
      *a Bolt
      *b Screw

      Remove the bolt and screw.

    2. Disengage the 3 claws and remove the front bumper side retainer LH.

  29. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  30. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A013B5K

      Disengage the 2 guides and remove the front bumper energy absorber.

  31. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  32. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  33. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. w/o TOYOTA Parking Assist-sensor System:


      1. A013AJS

        Disengage the 5 clamps.

      2. Remove the 8 bolts and front bumper reinforcement sub-assembly.

    2. w/ TOYOTA Parking Assist-sensor System:


      1. A0139MK

        Disengage the 7 clamps.

      2. Remove the 8 bolts and front bumper reinforcement sub-assembly.