REAR BUMPER(for Hatchback) REASSEMBLY

PROCEDURE

1. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH

   
   

   1. 

      Install the rear bumper arm sub-assembly LH with the 3 bolts.

      Torque:

      11.5 N*m  { 117 kgf*cm, 8 ft.*lbf }

2. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

3. INSTALL NO. 1 REAR BUMPER REINFORCEMENT

   
   

   1. 

      Install the No. 1 rear bumper reinforcement with the 8 bolts.

      Torque:

      11.5 N*m  { 117 kgf*cm, 8 ft.*lbf }

4. INSTALL REAR BUMPER SIDE SEAL LH

   
   

   1. 

      Install the rear bumper side seal LH with the 3 clips.

5. INSTALL REAR BUMPER SIDE SEAL RH

   
   

   1. 

      Install the rear bumper side seal RH with the 3 clips.

6. INSTALL UPPER REAR BUMPER RETAINER LH

   
   

   1. 

      Engage the 2 guides to temporarily install the upper rear bumper retainer LH to the rear combination light assembly LH.

   2. 

      Engage the 2 guides as shown in the illustration to temporarily install the upper rear bumper retainer LH and rear combination light assembly LH as a set.

   3. Install the upper rear bumper retainer LH with the screw.

7. INSTALL UPPER REAR BUMPER RETAINER RH

   Tech Tips

   Use the same procedure as for the LH side.

8. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

   Click here

9. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

10. INSTALL REAR BUMPER SIDE RETAINER LH

    
    

    1. 

       Engage the 3 claws.

    2. Install the rear bumper side retainer LH with the 2 screws.

11. INSTALL REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

12. INSTALL REAR BUMPER MOULDING

    
    

    1. 

       Engage the 10 claws to install the rear bumper moulding to the rear bumper extension.

    2. 

       Engage the 10 claws.

    3. 

       Install the rear bumper extension with rear bumper moulding with the 2 screws.

13. INSTALL REFLEX REFLECTOR ASSEMBLY LH

    
    

    1. 

       Engage the guide.

    2. Engage the claw.

    3. Install the reflex reflector assembly LH with the screw.

    4. 

       Engage the 6 claws to install the rear bumper extension sub-assembly LH.

14. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

15. INSTALL NO. 1 REAR BUMPER PAD

    
    

    1. Clean the rear bumper assembly.

       
       

       1. Remove any remaining double-sided tape from the rear bumper assembly.

       2. Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new No. 1 rear bumper pad.

       Tech Tips

       After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. 

       *a

       Line

       Install the No. 1 rear bumper pad as shown in the illustration.

       Tech Tips

       Install the No. 1 rear bumper pad along the line marked on the rear bumper assembly.

16. INSTALL NO. 2 LUGGAGE ROOM WIRE (w/o TOYOTA Parking Assist-sensor System)

    
    

    1. 

       Engage the clamp to install the No. 2 luggage room wire.

17. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

18. INSTALL NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

    
    

    1. Engage the 5 clamps.

       

       *a	Line	-	-
       	Adhesive Tape	-	-

    2. Connect the 4 connectors.

    3. Install the No. 2 luggage room wire to the rear bumper assembly with adhesive tape as shown in the illustration.

       Note

       
       

       • Apply the tape securely in place.

       • Do not touch the adhesive surface when applying the tape to prevent adhesion failure.