TEMPERATURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Using a 19 mm union nut wrench, install the engine coolant temperature sensor.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      Do not apply any excessive force to the heater pipe when installing the engine coolant temperature sensor.

   2. Connect the connector.

2. ADD ENGINE COOLANT (for Engine)

   Click here

3. INSPECT FOR COOLANT LEAK (for Engine)

   Click here

4. INSTALL NO. 1 ENGINE UNDER COVER

   Click here