PCV VALVE INSPECTION

PROCEDURE


  1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)


    1. Install a clean hose to the PCV valve (ventilation valve sub-assembly).

    2. Check PCV valve (ventilation valve sub-assembly) operation.


      1. A00YP0XC01
        *1 Clean Hose
        *a Air
        A00YN9X Cylinder Block Side

        Blow air into the cylinder block side, and check that air passes through easily.

        CAUTION:

        Do not suck air through the valve.

        Petroleum substances inside the valve are hazardous to your health.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

      2. A00YQ48C01
        *1 Clean Hose
        *a Air
        A00YN9X Intake Manifold Side

        Blow air into the intake manifold side, and check that air passes through with difficulty.

        CAUTION:

        Do not suck air through the valve.

        Petroleum substances inside the valve are hazardous to your health.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

    3. Remove the clean hose from the PCV valve (ventilation valve sub-assembly).