VACUUM SENSOR INSTALLATION

PROCEDURE

1. INSTALL VACUUM SENSOR (MANIFOLD ABSOLUTE PRESSURE SENSOR)

   
   

   1. Install the vacuum sensor (manifold absolute pressure sensor) with the bolt.

      Torque:

      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

   2. Connect the vacuum sensor connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

3. INSTALL INLET AIR CLEANER ASSEMBLY

   Click here

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

5. INSTALL NO. 2 CYLINDER HEAD COVER

   Click here