BATTERY COOLING FILTER INSPECTION

PROCEDURE


  1. INSPECT NO. 1 HYBRID VEHICLE BATTERY INTAKE FILTER


    1. Inspect the No. 1 hybrid vehicle battery intake filter.


      1. Visually inspect the No. 1 hybrid vehicle battery intake filter.

        Standard
        No deformation or cracks.

        If the result is not as specified, replace the No. 1 hybrid vehicle battery intake filter.

      2. A01G3QQC01
        *a Filter

        Inspect the filter.

        Standard
        No clogs or damage.

        Note


        • If the filter is damaged, replace the No. 1 hybrid vehicle battery intake filter with a new one.

        • If the filter is damaged, check if there is foreign matter inside the battery cooling blower assembly. Clean or replace the battery cooling blower assembly as necessary.

    2. Clean the filter.

      Note


      • Do not use water or any other liquids when cleaning the filter. Use only compressed air.

      • To prevent damage to the filter, do not use a wire brush or scrubber.

      • Do not clean the No. 1 hybrid vehicle battery intake filter with it installed to the vehicle.


      1. A01G3DNC01

        Clean the filter by blowing compressed air as shown in the illustration.