BATTERY BLOWER INSTALLATION

PROCEDURE

1. INSTALL BATTERY COOLING BLOWER ASSEMBLY

   
   

   1. Engage the 2 claws to install the battery cooling blower assembly.

   2. Install the 2 nuts and bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      
      

      • Be sure not to touch the fan part of the battery cooling blower assembly.

      • Do not lift the battery cooling blower assembly using the wire harness.

   3. Connect the 2 clamps and battery cooling blower assembly connector.

2. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

   
   

   1. Install the rear seat cushion leg sub-assembly with the 6 bolts.

      Torque:

      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

3. INSTALL REAR UNDER COVER

   
   

   1. Engage the 2 guides to install the rear under cover.

   2. Engage the clip.

4. INSTALL REAR UNDER SIDE COVER LH

   Click here

5. INSTALL REAR UNDER SIDE COVER RH

   Click here

6. INSTALL REAR SEAT CUSHION ASSEMBLY

   Click here