WATER PUMP WITH MOTOR INSTALLATION

PROCEDURE


  1. INSTALL INVERTER WATER PUMP ASSEMBLY


    1. A00YNT1

      Install the inverter water pump assembly and water pump bracket with the 3 bolts.

      Torque:
      6.1 N*m  { 62 kgf*cm, 54 in.*lbf }
    2. A00YPIBC01
      *a Alignment Mark
      A00YQ1Y Front Side

      Connect the inverter water pump assembly connector to the inverter water pump assembly.

    3. Connect the 2 water hoses, and slide the 2 clips to secure them.

      Note


      • Make sure that the clip is positioned as shown in the illustration.

      • Make sure to align the alignment marks of the hoses with the ribs of the inverter water pump assembly.

      • Do not remove the pieces of cloth from the pipes and disconnected hoses until installation to prevent foreign matter from entering the inverter water pump and cooling system.

  2. INSTALL INVERTER TRAY BRACKET

    Click here

  3. INSTALL INVERTER RESERVE TANK ASSEMBLY

    Click here

  4. INSTALL INVERTER WITH CONVERTER ASSEMBLY

    Click here