HYBRID VEHICLE CONTROL ECU(for LHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative(-) auxiliary battery terminal notices before proceeding with work.

    Click here

  2. REMOVE BATTERY BOX COVER


  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  6. REMOVE ECU INTEGRATION BOX RH


    1. A01KS5F

      Disengage the 2 clamps.

    2. Disconnect each connector.

    3. A01KT89

      Disengage the 2 clamps.

    4. A01KTFV

      Remove the 3 bolts.

    5. Disengage the guide and remove the ECU integration box RH.

  7. REMOVE HYBRID VEHICLE CONTROL ECU ASSEMBLY


    1. A01KU21

      Disengage the 2 claws and remove the hybrid vehicle control ECU assembly as shown in the illustration.