HYBRID CONTROL SYSTEM, Diagnostic DTC:P1606-308, P1606-317

DTC Code DTC Name
P1606-308 Collision has been detected or Collision Sensor Connection (Open)
P1606-317 Collision has been detected or Collision Sensor Connection (Open)

DESCRIPTION

The power management control ECU receives a signal that indicates a collision from the airbag sensor assembly to detect a collision. After detecting a collision, the power management control ECU shuts off the high voltage systems for safety.

Tech Tips

If P1606-308 or 317 is output, the hybrid system cannot be started unless the DTCs are cleared using the GTS.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P1606-308 Collision has been detected or Collision Sensor Connection (Open) Shutoff signal from the airbag sensor assembly is determined.

  • Airbag sensor assembly

  • Power management control ECU

  • Airbag system

 Does not come on

Master Warning Light:

Comes on
P1606-317 Collision has been detected or Collision Sensor Connection (Open) A collision is determined due to a wiring malfunction.

  • Power management control ECU

  • Airbag system

 Does not come on

Master Warning Light:

Comes on

PROCEDURE


  1. CHECK VEHICLE FOR COLLISION DAMAGE


    1. Check the vehicle condition.

      Result
      Result Proceed to
      The vehicle is not damaged. A
      The vehicle is damaged. B

    B

    REPAIR VEHICLE

    A

  2. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check for DTCs.


      Powertrain > Hybrid Control > Trouble Codes
      Result
      Result Proceed to
      P1606 only is output. A
      P0A1D is output. B

    5. Turn the power switch off.


    B

    GO TO DTC CHART (P0A1D) Click here

    A

  3. CHECK AIRBAG SYSTEM


    1. Troubleshoot the airbag system.

      Click here

      Result
      Result Proceed to
      The system is normal. A
      There is a malfunction in the system. B

    B

    REPAIR MALFUNCTIONING PARTS, COMPONENT AND AREA

    A

  4. CHECK INFORMATION CODE (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Access the freeze frame data of DTC P1606 and read the INF code.

      Result
      Result Proceed to
      INF code 308 is output. A
      INF code 317 is output. B

    5. Turn the power switch off.


    A

    REPLACE AIRBAG SENSOR ASSEMBLY Click here

    B

  5. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check for DTCs.


      Powertrain > Hybrid Control > Trouble Codes
      Result
      Result Proceed to
      One or two of the following conditions are met. A
      All of the following conditions are met. B
      DTC Output Status
      P3107-213 or P3107-214 is output.
      U0151-763 is output.
      U0110-160 or U0110-657 is output.

    5. Turn the power switch off.


    A

    REPLACE POWER MANAGEMENT CONTROL ECU for LHD: Click here
    REPLACE POWER MANAGEMENT CONTROL ECU for RHD: Click here

    B

    GO TO DTC CHART (HYBRID CONTROL SYSTEM) Click here