HEATED OXYGEN SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT NO. 3 ENGINE UNDER COVER


    1. A00YMZ5

      Remove the 4 clips and front No. 3 engine under cover.

  2. REMOVE HEATED OXYGEN SENSOR


    1. A00YPGH

      Disconnect the heated oxygen sensor connector.

    2. Remove the wire harness bracket.

    3. Remove the bolt and separate the wire harness clamp bracket.

    4. A00YP2Z

      Disconnect the 3 clamps of the wire harness to remove the wire harness clamp bracket.

    5. A00YNM6N02

      Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      SST
      09224-00010