KNOCK SENSOR INSTALLATION

PROCEDURE


  1. INSTALL KNOCK CONTROL SENSOR


    1. A00YO7NC01
      *a Front of Engine
      *b +/- 20°

      Install the knock control sensor to the cylinder block sub-assembly with the bolt as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Make sure that the knock control sensor is in the correct position.

    2. Connect the knock control sensor connector.

  2. INSTALL INTAKE MANIFOLD

    Click here