ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a 19 mm union nut wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

      Torque:

      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench.

      Click here

   3. Connect the engine coolant temperature sensor connector.

2. INSTALL INVERTER RESERVE TANK ASSEMBLY

   Click here

3. INSTALL FUEL INJECTOR ASSEMBLY

   Click here

4. ADD COOLANT (for Engine)

   Click here

5. INSPECT FOR COOLANT LEAK (for Engine)

   Click here

6. INSPECT FOR FUEL LEAK

   Click here