CAMSHAFT POSITION SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR

   
   

   1. Clean and degrease the threads of the bolt for the camshaft position sensor.

   2. 

      Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note

      Make sure that the O-ring is not cracked or moved out of place during installation.

   3. Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   4. Connect the camshaft position sensor connector.

2. INSPECT FOR OIL LEAK

   Click here

3. INSTALL NO. 2 CYLINDER HEAD COVER

   Click here