IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

1. INSTALL SPARK PLUG

   
   

   1. Using a 14 mm spark plug wrench, install the 4 spark plugs to the cylinder head sub-assembly.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

2. INSTALL IGNITION COIL ASSEMBLY

   
   

   1. Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      
      

      • When installing each ignition coil assembly, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

      • If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Install the same parts to their original positions.

   2. Connect the 4 ignition coil assembly connectors.

3. INSTALL NO. 2 CYLINDER HEAD COVER

   Click here