| Spark plug | ||
| Standard insulation resistance | Spark plug (terminal part) - Body ground | 10 MΩ or higher |
| Recommended spark plug type | DENSO made | SC20HR11 |
| Electrode gap | for new spark plug | 1.0 to 1.1 mm (0.0394 to 0.0433 in.) |
| Maximum electrode gap | for used spark plug | 1.3 mm (0.0512 in.) |
| Camshaft timing oil control valve assembly | ||
| Standard resistance | 1 - 2 | 6.9 to 7.9 Ω at 20°C (68°F) |
| Throttle body assembly | ||
| Standard resistance | 1 (M-) - 2 (M+) | 0.3 to 100 Ω at 20°C (68°F) |
| Mass air flow meter sub-assembly | ||
| Standard resistance | 1(THA) - 2(E2) | 13.6 to 18.4 kΩ at -20°C (-4°F) |
| 2.21 to 2.69 kΩ at 20°C (68°F) | ||
| 0.49 to 0.67 kΩ at 60°C (140°F) | ||
| Crankshaft position sensor | ||
| Standard resistance | 1 - 2 | 1630 to 2740 Ω at Cold |
| 2065 to 3225 Ω at Hot | ||
| Engine coolant temperature sensor | ||
| Standard resistance | 1 - 2 | 2.32 to 2.59 kΩ at 20°C (68°F) |
| 0.310 to 0.326 kΩ at 80°C (176°F) | ||
| Knock control sensor | ||
| Standard resistance | 1-2 | 120 to 280 kΩ at 20°C (68°F) |
| Air fuel ratio sensor | ||
| Standar resistance | 1 (HA1A) - 2 (+B) | 1.6 to 3.2 Ω at 20°C (68°F) |
| 1 (HA1A) - 4 (A1A-) | 10 kΩ or higher | |
| Heated oxygen sensor | ||
| Standard resistance | 1 (HT1B) - 2 (+B) | 11 to 16 Ω at 20°C (68°F) |
| 1 (HT1B) - 4 (E2) | 10 kΩ or higher | |
| IG2 relay | ||
| Standard resistance | (1L-1) - (1K-4) | 10 kΩ or higher (Auxiliary battery voltage is not applied between terminals 1K-3 and 1K-2) |
| (1L-1) - (1K-4) | Below 1 Ω (Auxiliary battery voltage is applied across terminals 1K-3 and 1K-2) |
|
| BATT FAN relay | ||
| Standard resistance | (1L-1) - (1K-8) | 10 kΩ or higher (Auxiliary battery voltage is not applied between terminals 1K-7 and 1K-6) |
| (1L-1) - (1K-8) | Below 1 Ω (Auxiliary battery voltage is applied across terminals 1K-7 and 1K-6) |
|
| EFI-MAIN relay | ||
| Standard resistance | (1L-1) - (1J-4) | 10 kΩ or higher (Auxiliary battery voltage is not applied between terminals 1J-2 and 1J-3) |
| (1L-1) - (1J-4) | Below 1 Ω (Auxiliary battery voltage is applied across terminals 1J-2 and 1J-3) |
|
| HORN relay | ||
| Standard resistance | (1L-1) - (1J-8) | 10 kΩ or higher (Auxiliary battery voltage is not applied between terminals 1J-6 and 1J-7) |
| (1L-1) - (1J-8) | Below 1 Ω (Auxiliary battery voltage is applied across terminals 1J-6 and 1J-7) |
|