STEERING KNUCKLE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL STEERING KNUCKLE


    1. Secure the steering knuckle between aluminum plates in a vise.

      Note

      Do not overtighten the vise.

    2. Install the front axle hub sub-assembly and front disc brake dust cover to the steering knuckle with the 4 bolts.

      Torque:
      96 N*m  { 979 kgf*cm, 71 ft.*lbf }

      Note

      Do not allow the magnet rotor side to become damaged or contact foreign matter.

  2. INSTALL FRONT LOWER BALL JOINT ASSEMBLY

    Click here

  3. INSTALL FRONT AXLE ASSEMBLY

    Click here