STEERING KNUCKLE REMOVAL

CAUTION / NOTICE / HINT

Note

When the brake pedal is first depressed after replacing the brake pads or pushing back the disc brake piston, DTC C1214 may be output. As there is no malfunction, clear the DTC.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT AXLE ASSEMBLY

    Click here

  2. REMOVE FRONT LOWER BALL JOINT ASSEMBLY

    Click here

  3. REMOVE STEERING KNUCKLE


    1. Secure the front axle assembly between aluminum plates in a vise.

      Note

      Do not overtighten the vise.

    2. A00YQ0V

      Remove the 4 bolts, front axle hub sub-assembly and front disc brake dust cover from the steering knuckle.

      Note


      • Do not drop the front axle hub sub-assembly.

      • Do not allow the magnet rotor side to become damaged or contact foreign matter.