FRONT DRIVE SHAFT ASSEMBLY COMPONENTS
ILLUSTRATION
| *1 | NO. 1 ENGINE UNDER COVER | *2 | REAR ENGINE UNDER COVER LH |
| *3 | REAR ENGINE UNDER COVER RH | - | - |
ILLUSTRATION
| *1 | FRONT AXLE SHAFT NUT | *2 | FRONT DRIVE SHAFT ASSEMBLY LH |
| *3 | FRONT FLEXIBLE HOSE | *4 | FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY |
| *5 | FRONT SPEED SENSOR | *6 | FRONT STABILIZER LINK ASSEMBLY |
| *7 | TIE ROD END SUB-ASSEMBLY | *8 | FRONT AXLE ASSEMBLY |
| *9 | COTTER PIN | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Do not apply lubricants | - | - |
ILLUSTRATION
| *1 | FRONT DRIVE SHAFT ASSEMBLY LH | *2 | FRONT DRIVE SHAFT ASSEMBLY RH |
| *3 | FRONT DRIVE SHAFT HOLE SNAP RING | *4 | HYBRID VEHICLE TRANSAXLE ASSEMBLY TYPE T OIL SEAL |
| ● | Non-reusable part |  |
ATF WS |
 |
MP grease | - | - |
ILLUSTRATION
| *A | for LH Side | *B | w/ Drive Shaft Damper |
| *1 | FRONT AXLE INBOARD JOINT BOOT | *2 | FRONT AXLE INBOARD JOINT BOOT CLAMP |
| *3 | FRONT AXLE OUTBOARD JOINT BOOT | *4 | FRONT AXLE OUTBOARD JOINT BOOT CLAMP LH |
| *5 | FRONT DRIVE INBOARD JOINT ASSEMBLY | *6 | FRONT DRIVE SHAFT DAMPER |
| *7 | FRONT DRIVE SHAFT DUST COVER | *8 | FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP |
| *9 | FRONT NO. 2 AXLE OUTBOARD JOINT BOOT CLAMP LH | *10 | SHAFT SNAP RING |
| *11 | TRIPOD JOINT | *12 | FRONT DRIVE OUTBOARD JOINT SHAFT ASSEMBLY |
| *13 | FRONT DRIVE SHAFT DAMPER CLAMP | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | for RH Side | *B | w/ Drive Shaft Damper |
| *1 | FRONT AXLE INBOARD JOINT BOOT | *2 | FRONT AXLE INBOARD JOINT BOOT CLAMP |
| *3 | FRONT DRIVE INBOARD JOINT ASSEMBLY | *4 | FRONT DRIVE SHAFT DAMPER |
| *5 | FRONT DRIVE SHAFT DUST COVER | *6 | FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP |
| *7 | SHAFT SNAP RING | *8 | TRIPOD JOINT |
| *9 | FRONT DRIVE OUTBOARD JOINT SHAFT ASSEMBLY | *10 | FRONT DRIVE SHAFT DAMPER CLAMP |
| ● | Non-reusable part | - | - |