ROAD SIGN ASSIST SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE ROAD SIGN ASSIST SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the Multi-information display


      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings Tab.

      3. Select the setting by referring to the table below.

        Settings Tab
        Display Default Content Setting Relevant ECU
        RSA ON/OFF ON System ON/OFF setting ON or OFF Pre-crash safety city sensor

      4. Enter the following menus: Settings Tab / Settings / Road Sign Assist Setup

      5. Select the setting by referring to the table below.

        Road Sign Assist Setup
        Display Default Content Setting Relevant ECU
        Notification Method Only Visual Speed limit exceeded notification method setting No Notification, Only Visual or Visual and Audible Pre-crash safety city sensor
        Excess Speed 2 km/h (1 mph) Speed limit exceeded notification level setting* 10 km/h (5 mph), 5 km/h (3 mph), 2 km/h (1 mph) Pre-crash safety city sensor
        Other Notifications Only Visual No overtaking notification method setting No Notification, Only Visual or Visual and Audible Pre-crash safety city sensor

        *: When the speed unit settings of the meter are changed, the displayed unit also changes.