CRUISE CONTROL SYSTEM, Diagnostic DTC:P0575

DTC Code DTC Name
P0575 Cruise Control Input Circuit

DESCRIPTION

This DTC indicates an abnormality in the power management control ECU.

DTC No. Detection Item DTC Detection Condition Trouble Area
P0575 Cruise Control Input Circuit

When both of the following conditions are met:


  • STP signals input to the power management control ECU supervisory CPU and control ECU are different for 0.15 seconds or more

  • 0.4 seconds have passed after cruise cancel input signal (STP input) is input to the power management control ECU

 Power management control ECU

Tech Tips

The power management control ECU receives signals from each sensor to control all functions of the cruise control system. When a trouble code is detected, the fail-safe function activates and remains on until the power switch is turned off.

PROCEDURE


  1. CHECK FOR DTCs


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs

    5. Perform the following to make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the malfunction cannot be detected.


      1. Drive the vehicle at a speed for which cruise control operation is possible.

      2. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      3. Push the cruise control switch to -/SET to begin control of vehicle speed using the cruise control system.

    6. Check the DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      Result
      Result Proceed to
      DTC is not output A
      DTC P0575 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE POWER MANAGEMENT CONTROL ECU for LHD: Click here
    REPLACE POWER MANAGEMENT CONTROL ECU for RHD: Click here