LANE DEPARTURE ALERT SYSTEM UTILITY

Note


  • If "Recognition Camera/Target Position Memory" and "Recognition Camera Axis Adjust" are not performed, all systems using the pre-crash safety city sensor may be affected.

  • If the pre-crash safety city sensor has been replaced, or the windshield glass has been replaced or removed/installed, be sure to perform Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust.

    Click here

  • When replacing the windshield glass of a vehicle equipped with a pre-crash safety city sensor, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the pre-crash safety city sensor may not be able to be installed due to a missing bracket or the lane departure alert system may not operate properly due to a difference in the transmissivity or black ceramic border.

Tech Tips

The pre-crash safety city sensor recognizes the white lines in relation to the vehicle on the basis of coordinates derived from the traveling direction of the vehicle. These coordinates differ for each vehicle depending on the tolerance and installation position of the pre-crash safety city sensor. Therefore, pre-crash safety city sensor optical axis learning must be performed individually for each vehicle.


  1. RECOGNITION CAMERA/TARGET POSITION MEMORY


    1. Before performing "Recognition Camera Axis Adjust", store the recognition camera position information, target position information and vehicle information in the pre-crash safety city sensor.


      Chassis > PCS/LDA/RSA/LVN > Utility
      Tester Display
      Recognition Camera/Target Position Memory

      Tech Tips

      For pre-crash safety city sensor adjustment procedures.

      Click here

  2. RECOGNITION CAMERA AXIS ADJUST


    1. After performing the "Recognition Camera/Target Position Memory", further calibrate the stored data.


      Chassis > PCS/LDA/RSA/LVN > Utility
      Tester Display
      Recognition Camera Axis Adjust

      Tech Tips


      • Since there is a margin of error in the internal data derived from the stored pre-crash safety city sensor position (horizontal and vertical coordinates, etc.), calibrating the internal data stored in the pre-crash safety city sensor improves the recognition sensitivity of the pre-crash safety city sensor.

      • For pre-crash safety city sensor adjustment procedures.

        Click here