POWER SWITCH INSTALLATION

PROCEDURE

1. INSTALL POWER SWITCH (for RHD)

   
   

   1. Engage the 2 claws and install the power switch.

2. INSTALL NO. 2 SWITCH HOLE BASE (for RHD)

   Click here

3. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

   Click here

4. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for RHD)

   Click here

5. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

   Click here

6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

   Click here

7. INSTALL NO. 1 METER HOOD CLUSTER (for RHD)

   Click here

8. INSTALL POWER SWITCH (for LHD)

   
   

   1. Engage the 2 claws to install the power switch.

9. INSTALL NO. 1 SWITCH HOLE BASE (for LHD)

   Click here

10. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

    Click here

11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for LHD)

    Click here

12. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Click here

13. INSTALL NO. 1 METER HOOD CLUSTER (for LHD)

    Click here

14. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

15. INSTALL BATTERY BOX COVER

    Click here