РЫЧАГ ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ (для моделей изготовления TMMT) РАЗБОРКА

PROCEDURE

1. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY

   
   

   1. 

      Disengage the 4 claws to remove the floor shift position indicator housing sub-assembly from the lower position indicator housing.

      Note

      Do not damage the lower position indicator housing.

2. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

   
   

   1. 

      Disconnect the indicator light wire sub-assembly from the lower position indicator housing.

   2. Disengage the clamp to remove the indicator light wire sub-assembly from the lower position indicator housing.

3. REMOVE POSITION INDICATOR LIGHT BULB

   
   

   1. Remove the position indicator light bulb from the position indicator light wire socket.

   2. Remove the cap from the position indicator light bulb.

4. REMOVE POSITION INDICATOR SLIDE COVER

   
   

   1. 

      Remove the position indicator slide cover from the lower position indicator housing.

5. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

   
   

   1. 

      Remove the No. 2 position indicator slide cover from the position indicator slide cover.

6. REMOVE LOWER POSITION INDICATOR HOUSING

   
   

   1. 

      Disengage the 5 claws to remove the lower position indicator housing from the shift lock control unit assembly.

7. REMOVE SHIFT LOCK ECU (w/o Smart Entry and Start System)

   
   

   1. 

      Disconnect the shift lock solenoid connector.

   2. 

      Disengage the 2 claws to remove the shift lock ECU from the shift lock control unit assembly.