РЫЧАГ ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ (для моделей изготовления TMMT) СНЯТИЕ

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

  2. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. A01M0UE

      Turn the shift lever knob sub-assembly counterclockwise to remove the shift lever knob sub-assembly.

  4. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01M0SW

      Disconnect the transmission control cable assembly from the shift lever assembly.

    2. A01LXG2C03
      *a Stopper

      Using a screwdriver, pull out the stopper of the transmission control cable assembly.

      Note

      Do not remove the stopper. If it is removed, reinstall it to its original position.

    3. A01LXGBC03
      *a Nut
      *b Turn approximately 180°

      Turn the nut of the transmission control cable assembly approximately 180° counterclockwise and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

      Note

      Do not turn the nut excessively as the internal spring may come off and the transmission control cable assembly will not be reusable.

  5. REMOVE SHIFT LEVER ASSEMBLY (for LHD)


    1. w/o Smart Entry and Start System:


      1. A01LY0HC01
        *a Transmission Control Switch Connector
        *b Indicator Light Wire Sub-assembly Connector
        *c Shift Lock Control ECU Connector

        Disconnect the transmission control switch connector.

      2. Disconnect the indicator light wire sub-assembly connector.

      3. Disconnect the shift lock control ECU connector.

      4. Disengage the 5 clamps to disconnect the wire harness from the shift lever assembly.

    2. w/ Smart Entry and Start System:


      1. A01LVP9C01
        *a Transmission Control Switch Connector
        *b Indicator Light Wire Sub-assembly Connector
        *c Shift Lock Control ECU Connector

        Disconnect the transmission control switch connector.

      2. Disconnect the indicator light wire sub-assembly connector.

      3. Disconnect the shift lock control ECU connector.

      4. Disengage the 5 clamps to disconnect the wire harness from the shift lever assembly.

    3. A01M2RB

      Remove the 4 bolts and shift lever assembly from the vehicle body.

  6. REMOVE SHIFT LEVER ASSEMBLY (for RHD)


    1. A01LW3ZC01
      *a Transmission Control Switch Connector
      *b Indicator Light Wire Sub-assembly Connector
      *c Shift Lock Control ECU Connector

      Disconnect the transmission control switch connector.

    2. Disconnect the indicator light wire sub-assembly connector.

    3. Disconnect the shift lock control ECU connector.

    4. Disengage the 5 clamps to disconnect the wire harness from the shift lever assembly.

    5. A01LW9V

      Remove the 4 bolts and shift lever assembly from the vehicle body.