ДАТЧИК ДАВЛЕНИЯ МАСЛА СНЯТИЕ

PROCEDURE

1. REMOVE FRONT WHEEL LH

2. REMOVE NO. 1 ENGINE UNDER COVER (for 1ZR-FAE)

   
   

   • for Half Cover Type:

     Click here

   • for Metal Type:

     Click here

3. REMOVE NO. 1 ENGINE UNDER COVER (for 8NR-FTS)

   Click here

4. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

   Click here

5. REMOVE REAR ENGINE UNDER COVER LH (for 8NR-FTS)

   Click here

6. REMOVE OIL PRESSURE SENSOR

   
   

   1. 

      Disconnect the oil pressure sensor connector.

   2. 

      Using SST, remove the oil pressure sensor from the rear transaxle case.

      SST

      09326-22011