МАСЛЯНЫЙ РАДИАТОР УСТАНОВКА

PROCEDURE

1. INSTALL TRANSMISSION OIL COOLER

   
   

   1. Apply Toyota Genuine CVT Fluid FE to 2 new O-rings.

   2. Install the 2 O-rings to the transmission oil cooler.

   3. Install the transmission oil cooler to the transaxle case with the 3 bolts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

2. CONNECT NO. 5 WATER BY-PASS HOSE

   
   

   1. Connect the No. 5 water by-pass hose to the transmission oil cooler and slide the 2 clips to secure it.

      Note

      Fully insert the No. 5 water by-pass hose to the 2nd rib on each oil cooler pipe.

3. ADD ENGINE COOLANT (for 1ZR-FAE)

   Click here

4. ADD ENGINE COOLANT (for 8NR-FTS)

   Click here

5. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

   Click here

6. INSPECT FOR COOLANT LEAK (for 1ZR-FAE)

   Click here

7. INSPECT FOR COOLANT LEAK (for 8NR-FTS)

   Click here

8. INSPECT FOR FLUID LEAK

9. INSTALL REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

   Click here

10. INSTALL REAR ENGINE UNDER COVER LH (for 8NR-FTS)

    Click here

11. INSTALL NO. 1 ENGINE UNDER COVER (for 1ZR-FAE)

    Click here

12. INSTALL NO. 1 ENGINE UNDER COVER (for 8NR-FTS)

    Click here