САЛЬНИК ПЕРЕДНЕГО ДИФФЕРЕНЦИАЛА ЗАМЕНА

PROCEDURE

1. REMOVE NO. 1 ENGINE UNDER COVER (for Metal Type)

   Click here

2. REMOVE REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

   Click here

3. REMOVE REAR ENGINE UNDER COVER LH (for 8NR-FTS)

   Click here

4. DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID

   
   

   1. 

      Remove the refill plug and gasket from the rear transaxle case.

   2. 

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the transaxle oil (CVT) pan sub-assembly.

   3. 

      *1	No. 1 Transmission Oil Filler Tube

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil (CVT) pan sub-assembly, and drain the fluid.

      Tech Tips

      Removing the No. 1 transmission oil filler tube will drain all oil in the transaxle oil (CVT) pan sub-assembly.

   4. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

      Torque:

      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

   5. Using a 6 mm hexagon socket wrench, temporarily install the overflow plug and gasket to the transaxle oil (CVT) pan sub-assembly.

      Tech Tips

      Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.

   6. Temporarily install the gasket and refill plug to the rear transaxle case.

      Tech Tips

      Reuse the old gasket as the refill plug will be removed again to adjust the fluid level.

5. REMOVE FRONT DRIVE SHAFT ASSEMBLY (for 1ZR-FAE)

   Click here

6. REMOVE FRONT DRIVE SHAFT ASSEMBLY (for 8NR-FTS)

   Click here

7. REMOVE FRONT DRIVE SHAFT OIL SEAL LH

   
   

   1. 

      Using SST, remove the front drive shaft oil seal LH from the transaxle case.

      SST

      09308-00010

      Note

      Do not damage the transaxle case.

8. REMOVE FRONT DRIVE SHAFT OIL SEAL RH

   
   

   1. 

      Using SST, remove the front drive shaft oil seal RH from the transaxle housing.

      SST

      09308-00010

      Note

      Do not damage the transaxle housing.

9. INSTALL FRONT DRIVE SHAFT OIL SEAL LH

   
   

   1. Coat the lip of a new front drive shaft oil seal LH with MP grease.

   2. 

      *a

      Depth

      Using SST and a hammer, install the front drive shaft oil seal LH to the transaxle case.

      SST

      09387-00010

      09950-70010   ( 09951-07150 )

      Standard Depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note

      
      

      • Be sure to install the front drive shaft oil seal LH in the correct direction.

      • Make sure to install the front drive shaft oil seal LH as specified, otherwise malfunctions such as a fluid leak will occur.

      • Do not damage the lip of the front drive shaft oil seal LH.

10. INSTALL FRONT DRIVE SHAFT OIL SEAL RH

    
    

    1. Coat the lip of a new front drive shaft oil seal RH with MP grease.

    2. 

       *a

       Depth

       Using SST and a hammer, install the front drive shaft oil seal RH to the transaxle housing.

       SST

       09554-14010

       09950-70010   ( 09951-07100 )

       Standard Depth
       -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

       Note

       
       

       • Be sure to install the front drive shaft oil seal RH in the correct direction.

       • Make sure to install the front drive shaft oil seal RH as specified, otherwise malfunctions such as a fluid leak will occur.

       • Do not damage the lip of the front drive shaft oil seal RH.

11. INSTALL FRONT DRIVE SHAFT ASSEMBLY (for 1ZR-FAE)

    Click here

12. INSTALL FRONT DRIVE SHAFT ASSEMBLY (for 8NR-FTS)

    Click here

13. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

    Click here

14. INSPECT FOR FLUID LEAK

15. INSTALL REAR ENGINE UNDER COVER LH (for 1ZR-FAE)

    Click here

16. INSTALL REAR ENGINE UNDER COVER LH (for 8NR-FTS)

    Click here

17. INSTALL NO. 1 ENGINE UNDER COVER (for Metal Type)

    Click here