ДАТЧИК ОБОРОТОВ ТРАНСМИССИИ УСТАНОВКА

PROCEDURE

1. Click here

   INSTALL TRANSMISSION REVOLUTION SENSOR

   
   

   1. Coat a new O-ring with MP grease.

   2. Install the O-ring to the transmission revolution sensor.

   3. 

      Install the transmission revolution sensor with the bolt.

      7.8 N*m

      80 kgf*cm

      69 in.*lbf

   4. 

      Connect the transmission revolution sensor connector.

   5. Connect the wire harness clamp.

2. Click here

   INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

4. Click here

   INSTALL BATTERY

   Click here

5. Click here

   INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

   Click here

6. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here