ЭБУ МЕХАНИЧЕСКОЙ ТРАНСМИССИИ "MULTIMODE" (для моделей с правосторонним рулевым управлением) УСТАНОВКА

PROCEDURE

1. INSTALL TCM

   
   

   1. Install the TCM to the body with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the 4 connectors to the TCM.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

   Click here

6. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

   Click here

7. PERFORM SYNCHRONIZATION POSITION CALIBRATION

   Click here