ЭБУ МЕХАНИЧЕСКОЙ ТРАНСМИССИИ "MULTIMODE" (для моделей с левосторонним рулевым управлением) УСТАНОВКА

PROCEDURE


  1. INSTALL TCM


    1. Install the TCM to the ECU integration box RH.

  2. INSTALL ECU INTEGRATION BOX RH


    1. Install the ECU integration box RH with the 3 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Connect each connector.

  3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for Hatchback)

    Click here

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for Sedan)

    Click here

  5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)


  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  7. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

    Click here

  8. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

    Click here

  9. PERFORM SYNCHRONIZATION POSITION CALIBRATION

    Click here