ГЕНЕРАТОР УСТАНОВКА

PROCEDURE

1. INSTALL GENERATOR ASSEMBLY

   
   

   1. Temporarily install the generator with the 2 bolts.

   2. Connect the vacuum pump oil outlet hose.

   3. Install 2 new gaskets and the vacuum pump oil inlet hose with the union bolt.

      Torque:

      14 N*m  { 140 kgf*cm, 10 ft.*lbf }

   4. Connect the vacuum pump hose.

   5. Attach the vacuum pump oil inlet hose to the cord clip.

   6. Install the generator wire with the nut.

      Torque:

      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

   7. Install the terminal cap.

   8. Connect the generator connector.

2. CONNECT COOLER COMPRESSOR ASSEMBLY

   Click here

3. INSTALL FAN AND GENERATOR V BELT

   
   

   1. Install the fan and generator V belt Click here.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.