ВЫХОДНОЙ ВАЛ РАЗБОРКА

PROCEDURE


  1. REMOVE NO. 3 SYNCHRONIZER RING


    1. Remove the No. 3 synchronizer ring from the output shaft.

  2. REMOVE OUTPUT SHAFT CENTER BEARING


    1. Remove the output shaft center bearing from the output shaft.

  3. REMOVE OUTPUT SHAFT REAR BEARING


    1. A01XIIFE01

      Using SST and a press, remove the output shaft rear bearing from the output shaft.

      SST
      09950-00020
      09950-60010   ( 09951-00510 )
      09950-70010   ( 09951-07100 )