ЗАДАЮЩАЯ ШЕСТЕРНЯ ПОВТОРНАЯ СБОРКА

PROCEDURE

1. INSTALL COUNTER GEAR FRONT BEARING

   
   

   1. 

      Using SST and a press, install a new front bearing to the counter gear.

      SST

      09515-10010

   2. 

      Select a snap ring that will allow minimal axial play.

      Standard clearance
      0.1 mm (0.00393 in.) or less

      Standard No. 2 Counter Gear Front Bearing Snap Ring
      Mark Thickness 1 2.05 to 2.10 mm (0.0807 to 0.0827 in.) 2 2.10 to 2.15 mm (0.0827 to 0.0847 in.) 3 2.15 to 2.20 mm (0.0847 to 0.0866 in.) 4 2.20 to 2.25 mm (0.0866 to 0.0886 in.) 5 2.25 to 2.30 mm (0.0886 to 0.0906 in.) 6 2.30 to 2.35 mm (0.0906 to 0.0925 in.)

   3. 

      Using a snap ring expander, install the snap ring.