ЗАДАЮЩАЯ ШЕСТЕРНЯ ПРОВЕРКА

PROCEDURE

1. INSPECT COUNTER GEAR

   
   

   1. 

      Using a micrometer, measure the outside diameter of the journal surface.

      Standard outside diameter
      25.984 to 26.000 mm (1.0230 to 1.0236 in.)

      Minimum outside diameter
      25.984 mm (1.0230 in.)

      
      

      • If the outside diameter is less than the minimum, replace the counter gear.

2. INSPECT COUNTER GEAR FRONT BEARING

   
   

   1. 

      Check that the front bearing rotates smoothly.

      
      

      • If the bearing does not rotate smoothly, replace the bearing.